YOUR CURRENT LOCATION:->

How to effectively prevent bow and arrow explosion

来源:Weifangkaimei Precision machinery Co., Ltd.      Release date:2019-11-01   

Previously for composite bow explosion problem has a commentary, out of the user's responsibility, here for how to prevent explosive arrows give some instructions. Preferred composite bow because of the special arrows, the arrow away from the hands of relatively far, relatively safe, but only relative! Remember: Never shoot a damaged arrow!

Never shoot damaged arrows. Regardless of the model, size, brand, or type of arrow you choose, you must check each arrow to see if it is damaged before each shot. Appropriate maintenance can make your arrows can be used for several years. Otherwise, the shaft will be damaged, and shoot this arrow is very unsafe. Never think which arrows are safe, even the brand new arrows, until you check that you are safe. You should be responsible for checking your gear and making sure your arrows are in good condition.

Bend test steps To check the arrows, use both hands to grasp the ends of the shaft to bend, check the shaft for rupture, scars, dents. Rotate and repeat the inspection several times to ensure that the shaft is not damaged. If you find any damage, immediately damage it. A damaged carbon arrow can cause personal injury.

Archery To ensure that the arrows are long enough to cut the carbon arrows to fit the length of your bow is important. Arrows too short will cause the arrows to snap on the arrow or to the other side of the bow. If the arrow on the arrow in the arrow, will damage the shaft, the bow, people will cause harm. When a full bow is drawn, one end of the shaft (not including the arrow) should extend approximately 1 inch or more beyond the arrowhead. The length of the shaft is just too short. Please note that changing the pull of your bow will change the length of the arrow accordingly. Also, as you use the bow longer, the bowstring will be slightly longer (all bowstring are the same), especially for a long time do not harness the bow string. If you choose not to string the rope, and a regular replacement, the length of the requirements of the rod will change over time.

Use the correct method in the bow string arrows Before the archery, please determine whether the arrow is a good card in the bow string. Some of the end of the arrow has a "double-ring" function, that is, when you hear the second sound when the arrow is very good stuck in the bowstring. Arrows do not have a good archery to cause the arrows to fall during the bow process. This will result in empty or arrow flying blocked, on the bow, the person may cause harm.

Telephone: +86-536-7670666 7660999   Foreign trade department :86-15726072993

Address: Healthy Street, Weifang City, Shandong Province, 6399

Weifangkaimei Precision machinery Co., Ltd.  © All rights reserved. 

欢迎给我们留言
姓名
电话
邮箱
地址